Best-CA 212

very low viscous, capillary, etremely fast cure, high strength, temperature resistant, for bonding of rubber / metals
Strength class: high strength
Curing system: humidity
Viscosity: 20
Chemical type: ethyl-cyanoacrylate
Final Strength: 20 hours
Fixture Time: 3 - 5 seconds

BEST-CA 212 is a one-component, solvent free cyanoacrylate adhesive based on ethyl-cyanoacrylate. 

BEST CA 212 is the standard product for bonding of plastics, e.g. polyamide, PVC, PMMA and various elastomeres amongst each other and with metals, glass and ceramics. 

BEST-CA 212 is very fast cure. After full cure the adhesive is high strength and temperature resistant. 

BEST-CA 212 is ready-to-use and can be applied from the original container. 

BEST-CA 212 is applied spot-wise or bead like. Assemble parts by using short, firm pressure. Curing process starts within seconds. On most materials fixture time is reached within 3 to 5 seconds. 85 % of final cure is reached after 30 minutes, 100% after 20 hours. The rate of cure depends on the ambient relative humidity. A relative humidity of 40 to 60% will lead to best results. Lower values may delay cure. 

Bonding surfaces must be dry, free of dust and grease as well as other contaminants. Sand-blasting, grinding and staining bonding surfaces will enhance adhesion on bonding surfaces.


BEST-CA adhesives show good resistance to changing climatic conditions and chemical influences.

Buy the Product

product inquiry for a sample to CA 212

Safety data sheet only available via email
  • This field is for validation purposes and should be left unchanged.