| high viscous, temperature resistant, thixotropic, universal, elastic, black, bonding of rubber/synthetic materials, metals | |
| Strength class: | high strength |
| Curing system: | humidity |
| Viscosity: | 6000 |
| Chemical type: | ethyl-cyanoacrylate |
| Final Strength: | 20 hours |
| Fixture Time: | 10 - 15 seconds |
| Appearance: |  |
BEST-CA 236 is a one-component, solvent free and impact resistant, black coloured cyanoacrylate adhesive based on ethyl-cyanoacrylate.
BEST-CA 236 is a special product for bonding of plastics, e.g. polyamide, PVC, PMMA and various elastomeres, e.g. rubber, EPDM and viton among each other.
BEST-CA 236 is very fast cure. After full cure the adhesive is high strength and temperature resistant.
BEST-CA 236 is ready-to-use and can be applied from the original container.
BEST-CA 236 is applied spot-wise or bead like. Assemble parts by using short, firm pressure. Curing process starts within seconds. On most materials fixture time is reached within
15 to 20 seconds. 85 % of final cure is reached after 30 minutes, 100% after 20 hours. The rate of cure depends on the ambient relative humidity. A relative humidity of 40 to 60% will lead to best results. Lower values may delay cure.
Bonding surfaces must be dry, free of dust and grease as well as other contaminants. Sand-blasting, grinding and staining bonding surfaces will enhance adhesion on bonding surfaces.
CHEMICAL AND ENVIRONMENTAL RESISTANCE
BEST-CA adhesives show good resistance to changing climatic conditions and chemical influences.