temperature resistant, moisture resistant, for bonding of wood, synthetic materials, e.g. polyamide, PVC, PMMA, polystyrene and several elastomeres, e.g. rubber, EPDM, viton among each other and with metals and ceramics | |
Strength class: | high strength |
Curing system: | humidity |
Viscosity: | 3000 |
Chemical type: | ethyl-cyanoacrylate |
Final Strength: | 20 hours |
Fixture Time: | 10 - 15 seconds |
Appearance: | ![]() |
BEST-CA 233T is a one-component, solvent free cyanoacrylate adhesive based on ethyl-cyanoacrylate.
BEST-CA 233T is specially designed for temperature- and humidity-resistant bonding of wood and plastics, e.g. polyamide, PVC, PMMA, polystyrene and various elastomeres, e.g. rubber, EPDM and viton amongst each other and with metals and ceramics.
BEST-CA 233T is very fast cure. After full cure the adhesive is high strength and temperature resistant.
BEST-CA 233T is ready-to-use and can be applied from the original container.
BEST-CA 233T is applied spot-wise or bead like. Assemble parts by using short, firm pressure. Curing process starts within seconds. On most materials fixture time is reached within 10 to 15 seconds. 85 % of final cure is reached after 30 minutes, 100% after 20 hours. The rate of cure depends on the ambient relative humidity. A relative humidity of 40 to 60% will lead to best results. Lower values may delay cure.
Bonding surfaces must be dry, free of dust and grease as well as other contaminants. Sand-blasting, grinding and staining bonding surfaces will enhance adhesion on bonding surfaces.
CHEMICAL AND ENVIRONMENTAL RESISTANCE
BEST-CA adhesives show good resistance to changing climatic conditions and chemical influences.